1. The cutting and rewinding machine should process the entire roll or sheet of raw materials in the fixed-length cutting process, such as plastic packaging materials, packaging cartons, steel plates, films, leather and wood cutting, all of which should adopt the fixed-length cutting process.

2. The cutting length can be set continuously. If there is an error in the actual cutting length, it can be calibrated by setting parameters.

3. The cutting control of the slitting and rewinding machine is divided into two types: static and dynamic cutting: set the desired length downward, then static slitting, and restart after the cutting operation; when the set length is reached, the slitting machine stops the signal The dynamic cutter is sent to cut material during movement.

Structural advantages of slitting and rewinding machines:

There is a paper tube processing spindle in the middle of the slitting and rewinding machine. The front end of the spindle is fixed on the base with a set of bearings, and a pulley is installed in the middle of the set of bearings; a compression cylinder is installed near the base, and a compression cylinder is installed on the upper end of the cylinder's support rod. Set support rod bearings to support the spindle.

The slitting and rewinding machine is attached to the surgeon at the upper end of the shaft and is provided with multiple blades on it and arranged according to a certain gap; a main blade shaft support frame is also provided on the top of the slitting and rewinding machine, The support tube of the support frame is attached to the middle. The structural advantages of the slitting and rewinding machine fill the technical gap of the automatic pipe cutting machine.

Choose D & S Automatic, we will provide you with the best service.